Bona Mix & Fill Plus is a high-performance, waterborne wood floor gap filler designed to fill gaps and imperfections in wooden flooring before sanding and finishing. Formulated with an acrylate-based binder, it offers excellent filling capacity comparable to solvent-based alternatives, while providing a more pleasant working environment with low odour and reduced VOC emissions.
Mixed with fine wood dust from the sanding process, Bona Mix & Fill Plus creates a natural-looking filler that blends with the colour of the existing timber. Its quick-drying formulation and excellent sanding properties make it an efficient choice for professional floor restoration and renovation projects.
Suitable for filling gaps up to 3mm wide, Bona Mix & Fill Plus offers reliable performance and, under normal conditions, typically requires only one application.
Key Features
- High filling capacity for wooden floor gaps and imperfections
- Suitable for gaps up to 3mm wide
- Waterborne acrylate-based formulation
- Mixed with fine wood dust to create a natural colour match
- Good sanding properties for an efficient finishing process
- Quick drying under normal conditions
- Low odour for a more pleasant working environment
- Low VOC content
- Anti-corrosive properties
- Suitable for use before Bona floor lacquers and oils
- Often requires only one application under normal conditions
Directions for Use
-
Prepare the filler: Collect fine wood dust from the sanding process, ideally matching the timber being treated
-
Mix: Combine 85–90% Bona Mix & Fill Plus binder with 10–15% fine wood dust until a smooth, workable paste is achieved
-
Apply: Use a stainless steel trowel to spread the mixture across the floor, working it into the gaps and imperfections
-
Allow to dry: Under normal conditions, allow approximately 30–60 minutes before sanding
-
Sand: Once fully dry, sand the floor to remove excess filler and achieve a smooth, even surface
-
Finish: Allow approximately 1–2 hours before applying the chosen floor lacquer or oil treatment
Drying times depend on the width and depth of the gaps, temperature and humidity. Gaps wider than 2mm require overnight drying.
Important Information
- Designed for filling gaps in wooden flooring before sanding and finishing
- Use fine, clean wood dust from the sanding process to achieve a colour that complements the floor
- Wider and deeper gaps will require longer drying times
- Gaps wider than 2mm should be left to dry overnight before sanding
- Drying times quoted are based on normal conditions of approximately 20°C and 60% relative humidity
- Reseal the container immediately after use
- Store and transport between +5°C and +25°C
Product Specifications
| Specification |
Details |
| Product type |
Waterborne wood floor gap filler |
| Binder |
Acrylate |
| Solids content |
Approximately 38% |
| VOC content |
Maximum 15g/litre |
| Mixing ratio |
85–90% binder to 10–15% wood dust |
| Suitable gap width |
Up to 3mm |
| Drying before subsequent application |
15–30 minutes |
| Drying before sanding |
30–60 minutes |
| Drying before lacquer or oil |
1–2 hours |
| Drying for gaps wider than 2mm |
Overnight |
| Application tools |
Stainless steel trowel |
| Coverage |
Approximately 8–12m² per litre, depending on gap size and quantity |
| Safety classification |
Unclassified |
| Storage temperature |
+5°C to +25°C |
| Pack size |
5L |