Description
Bona Amber Primer is a one-component, waterborne polyurethane primer designed to give wooden floors a rich, warm amber colouration. It creates a deeper timber appearance similar to that traditionally achieved with solvent-based lacquers, without the associated risks of solvent-based products.
Particularly suitable for oak and darker wood species, including tropical timbers, Bona Amber enhances the natural character of the wood while providing excellent abrasion properties. It is also well suited to floors with underfloor heating and moving floors, such as end-grain and plank flooring, helping to reduce the risk of side-bonding between floorboards.
Easy to apply using a Bona Roller or Swivel Head Applicator, Bona Amber provides an attractive foundation for compatible Bona lacquer systems.
Key Features
- Creates a rich, warm amber colouration on wooden floors
- Produces a timber appearance similar to traditional solvent-based lacquers
- Particularly suitable for oak and darker wood species, including tropical timber
- Excellent abrasion properties
- Helps reduce the risk of side-bonding between floorboards
- Suitable for floors with underfloor heating
- Ideal for moving floors, including end-grain and plank flooring
- One-component, waterborne polyurethane formulation
- Easy application using a Bona Roller or Swivel Head Applicator
- GREENGUARD certified
- French VOC rating A+
- DIBt certified
Directions for Use
Preparation
Ensure the floor has acclimatised to its intended environment and is sanded back to bare wood. The surface must be dry and free from sanding dust, oil, wax and other contamination. Final sanding with a 120-grit abrasive is recommended.
Application
- Shake the container thoroughly before use and insert the supplied filter. Filter the product through a fine strainer to minimise the risk of undispersed pigment particles reaching the floor
- Pour into a clean, dry container
- Apply evenly using a Bona Roller or Swivel Head Applicator, working with the grain at approximately 8–10m² per litre
- Avoid allowing the product to accumulate on the surface
- Allow approximately 1–2 hours drying time
- Once dry, lightly abrade using the Bona Scrad System or a sanding screen with 120–150 grit to reduce grain raising
- Alternatively, apply one coat of lacquer before abrading. If the lacquer is applied within 24 hours of Bona Amber, intermediate abrasion is not required
- Remove all sanding dust and complete the treatment with a compatible Bona lacquer
Recommended Treatment Schedules
For commercial floors:
- 1 coat Bona Amber
- Light sanding with 150-grit abrasive
- 1 coat Bona Amber
- 1–2 coats Bona Lacquer
Alternative treatment:
- 1 coat Bona Amber
- Light sanding with 150-grit abrasive
- 1 coat Bona Amber
- 2 coats Bona Lacquer
Important Information
- Bona Amber must only be applied directly to bare, untreated wood
- Do not use in conjunction with stains or oils, or to overcoat existing finishes
- Bona Amber must never be used as the final floor treatment; always finish with a compatible Bona lacquer
- Do not apply more than two full coats of primer and/or lacquer in one day, as this may cause excessive wood swelling
- Tropical timber species such as teak, Ipe, smoked oak and wenge, as well as some softwoods, contain natural ingredients that may extend drying times or cause wetting issues and colour changes
- Identify the timber species and carry out a trial application to assess the colour and appearance before treating the entire floor
- In warm or dry conditions, up to 4% Bona Extender may be added to extend the open time and help reduce overlapping and discolouration

Product Specifications
| Product type | Tinted waterborne polyurethane wood floor primer |
|---|---|
| Formulation | One-component |
| Solids content | Approximately 32% |
| Colouration | Rich amber |
| Pack size | 5L |
| Application rate | 8–10m² per litre per coat |
| Application tools | Bona Roller or Swivel Head Applicator |
| Drying time | 1–2 hours |
| Recommended sanding | 120–150 grit |
| Dilution | Up to 4% Bona Extender if required |
| Minimum application temperature | 13°C |
| Optimum application conditions | 18–25°C and 30–60% relative humidity |
| Certifications | GREENGUARD, French VOC A+, DIBt |
| Safety classification | Unclassified |
| Storage temperature | +5°C to +30°C |



