Description
Bona Intense is a one-component, waterborne polyurethane primer designed to give wooden floors a medium-rich colouration, enhancing the natural warmth and character of the timber. Its carefully formulated finish provides a deeper, richer appearance while maintaining the natural look of the wood.
Suitable for practically all wood species, Bona Intense is particularly effective on tropical timber. Its excellent abrasion properties and compatibility with floors subject to movement make it a suitable choice for end-grain and plank flooring, as well as installations with underfloor heating. The formulation also helps reduce the risk of side-bonding between floorboards.
Easy to apply using a Bona Roller or Swivel Head Applicator, Bona Intense provides a consistent foundation for subsequent Bona lacquer coatings.
Key Features
- Creates a medium-rich colouration on wooden floors
- Enhances the natural warmth and character of timber
- Suitable for practically all wood species, particularly tropical timber
- Excellent abrasion properties
- Helps reduce the risk of side-bonding between floorboards
- Suitable for floors with underfloor heating
- Ideal for moving floors, including end-grain and plank flooring
- One-component, waterborne polyurethane formulation
- Easy application using a roller or Swivel Head Applicator
- GREENGUARD certified
- EMICODE EC2 low emissions certified
- French VOC rating A+
- Suitable for use beneath compatible Bona lacquers
Directions for Use
Preparation
Ensure the floor has acclimatised to its intended environment and is sanded back to bare wood. The surface must be dry and free from sanding dust, oil, wax and other contamination. Final sanding with a 120-grit abrasive is recommended.
Application
- Allow the product to reach room temperature before use
- Shake the container vigorously and insert the supplied filter
- Apply evenly using a Bona Roller or Swivel Head Applicator, working with the grain at approximately 8–10m² per litre
- Avoid allowing the product to accumulate on the surface
- Allow approximately 1–2 hours drying time before the next application
- If applying two coats of Bona Intense, lightly sand between primer coats
- If applying one coat, sand after the first layer of lacquer using the Bona Scrad System with Wing 150 grit or finer
- Remove all sanding dust before completing the floor treatment with compatible Bona lacquer
Recommended Treatment Schedule
- Apply 1 coat of Bona Intense
- Allow to dry
- Lightly sand using 150-grit abrasive
- Apply 2–3 coats of compatible Bona lacquer
Important Information
- Bona Intense must only be applied directly to bare, untreated wood
- Do not use in conjunction with stains or oils, or to overcoat existing finishes
- Bona Intense must never be used as the final floor treatment; always finish with a compatible Bona lacquer
- Do not apply more than two full coats of primer and/or lacquer in one day, as this may cause excessive wood swelling
- Tropical timber species such as teak, Ipe, smoked oak and wenge, as well as some softwoods, contain natural ingredients that may extend drying times or cause wetting issues and colour changes
- Identify the timber species and carry out a trial application to assess the colour and appearance before treating the entire floor
- In warm or dry conditions, up to 4% Bona Extender may be added to extend the open time and help reduce overlapping and discolouration

Product Specifications
| Product type | Waterborne polyurethane wood floor primer |
|---|---|
| Formulation | One-component |
| Solids content | Approximately 32% |
| Colouration | Medium-rich wood colour |
| Pack size | 5L |
| Application rate | 8–10m² per litre per coat |
| Application tools | Bona Roller or Swivel Head Applicator |
| Drying time between coats | 1–2 hours |
| Recommended treatment | 1 coat primer followed by 2–3 coats Bona lacquer |
| Dilution | Up to 4% Bona Extender if required |
| Minimum application temperature | 13°C |
| Optimum application conditions | 18–25°C and 30–60% relative humidity |
| Emissions certifications | GREENGUARD, EMICODE EC2, French VOC A+, DIBt |
| Safety classification | Unclassified |
| Storage temperature | +5°C to +30°C |



