Description
Bona Natural Primer is a pigmented, waterborne primer designed to give untreated wooden floors a natural, raw wood appearance. Its carefully formulated pigmentation helps preserve the light, untreated look of timber while providing a subtle finish that enhances the natural character of the wood.
Suitable for use on most wood species, Bona Natural is particularly well suited to lighter, blonde timber floors, helping to emphasise their natural colour. It can be applied in one or two coats to achieve the desired appearance and is designed to be finished with a compatible Bona lacquer.
For the best natural-looking results, Bona recommends combining it with an Extra Matt or Ultra Matt version of Bona Traffic HD (including Traffic HD Raw), Bona Traffic GO or Bona Mega EVO.
Key Features
- Creates a light, untreated raw wood appearance
- Helps preserve the natural, blonde appearance of wooden floors
- Pigmented waterborne acrylate/polyurethane formulation
- Suitable for most wood species, particularly lighter timber
- Adjustable appearance with one or two coats
- Easy roller application
- One-component formulation
- EC1PLUS certified for very low indoor air emissions
- GREENGUARD certified
- French VOC rating A+
- Suitable for use beneath compatible Bona lacquers
Directions for Use
Preparation
Ensure the floor has acclimatised to its intended environment and is sanded back to bare wood. The surface must be dry and free from sanding dust, oil, wax and other contamination. Final sanding with a 120-grit abrasive is recommended.
Application
- Shake the container vigorously before use and filter the product through a fine strainer to minimise the risk of undispersed pigment particles reaching the floor
- Apply evenly using a Bona Microfibre or Fleece Roller, or Swivel Head Applicator, working with the grain at approximately 10–12m² per litre
- Avoid allowing the product to accumulate on the surface
- Allow approximately 1–2 hours drying time between coats
- If applying two coats of Bona Natural, lightly sand between primer coats. If applying one coat, sand after the first layer of lacquer, using the Bona Scrad System with Wing 150 grit or finer
- Remove all sanding dust and complete the floor treatment with a suitable Bona lacquer
Recommended Treatment Schedules
- Option 1: 2 coats Bona Natural followed by 1 coat Bona Lacquer
- Option 2: 1 coat Bona Natural followed by 2 coats Bona Lacquer
For the most natural appearance, use an Extra Matt or Ultra Matt version of Bona Traffic HD (including Raw), Bona Traffic GO or Bona Mega EVO.
Important Information
- Bona Natural must only be applied directly to bare, untreated wood
- Do not use in conjunction with stains or oils, or to overcoat existing finishes
- Bona Natural must never be used as the final floor treatment; always finish with a compatible lacquer
- Do not apply more than two full coats of primer and/or lacquer in one day, as this may cause excessive wood swelling
- A sample of the intended treatment system should be prepared beforehand to assess the final colour and appearance
- Plasticisers in carpet underlays, furniture legs, castors and adhesives can cause softening or discolouration
- Spills should be removed promptly to prevent cosmetic staining or surface damage
Product Specifications
| Product type | Pigmented waterborne wood floor primer |
|---|---|
| Base | Acrylate/polyurethane |
| Formulation | One-component |
| Solids content | Approximately 30% |
| Appearance | Light, untreated raw wood effect |
| Pack size | 5L |
| Application rate | 10–12m² per litre per coat |
| Application tools | Bona Microfibre/Fleece Roller or Swivel Head Applicator |
| Drying time between coats | 1–2 hours |
| Recommended number of coats | 1–2 |
| Dilution | Up to 4% Bona Extender if required |
| Minimum application temperature | 13°C |
| Optimum application conditions | 18–25°C and 30–60% relative humidity |
| Certifications | EMICODE EC1PLUS, GREENGUARD, French VOC A+, DIBt |
| Safety classification | Unclassified |
| Storage temperature | +5°C to +30°C |



