Description
Bona Traffic HD Raw is a premium, two-component, water-based polyurethane lacquer designed to provide outstanding protection for wooden floors while preserving the natural look and feel of untreated timber. Its ultra-matt finish creates an almost invisible protective surface, maintaining the appearance of freshly sanded wood without the conventional look of a lacquered floor.
Developed for both residential and commercial environments, Bona Traffic HD Raw combines excellent wear resistance with a unique surface structure that provides a soft, natural feel underfoot and enhanced slip safety. It is particularly suitable for homes with children and pets, as well as commercial spaces where durable, natural-looking flooring is required.
Bona Traffic HD Hardener is included.
Key Features
- Two-component, water-based polyurethane wood floor lacquer
- Maintains the natural appearance and feel of untreated wood
- Ultra-matt finish for an authentic raw timber effect
- Provides durable, hard-wearing protection for wooden floors
- Unique surface structure creates a soft, natural feel underfoot
- High slip safety, helping reduce the risk of slipping
- Clear, non-yellowing formulation
- Suitable for residential and commercial flooring
- Suitable for compatible pre-finished wooden floors
- Low indoor emissions
- GREENGUARD Gold and EMICODE EC1 certified
- Bona Traffic HD Hardener included
Directions for Use
Preparation
Ensure the floor is acclimatised to its intended environment, properly sanded, dry and free from sanding dust, oil, wax and other contamination.
Allow the lacquer and hardener to reach room temperature before use.
Mixing
- Add the hardener to the lacquer at the correct mixing ratio
- Mix one part hardener to each 1 litre of Bona Traffic HD Raw
- For the full 4.95L pack, use the supplied 0.41L hardener
- Shake the mixture vigorously for at least one minute immediately after adding the hardener
- Use the mixed product within a maximum of 3 hours at 20°C. Pot life will be shorter at higher temperatures
Application
- Apply using a Bona Microfleece Roller with an 11mm pile
- Apply evenly at approximately 8–10m² per litre per coat
- Maintain a consistent application technique to achieve an even finish
- Allow approximately 2–3 hours drying time before applying the next coat
- If the previous coat has been left to dry for more than 24 hours, intermediate sanding is recommended using P150 grit or finer
- Remove all sanding dust before applying the next coat
For a longer open time, Bona Extender can be added at 4% if required, following the manufacturer's instructions.
Drying Times
- Between coats: Approximately 2–3 hours
- Light use: Approximately 24 hours
- Full cure: Approximately 7 days
Drying times are based on normal conditions of 20°C and 60% relative humidity. Lower temperatures and higher humidity can extend drying times.
Application Conditions
- Recommended temperature: 18–25°C
- Recommended relative humidity: 30–60%
- Minimum application temperature: 13°C
- Store and transport between +5°C and +30°C
Important Information
- The hardener component is classified and must be handled in accordance with the product safety information
- Ensure adequate ventilation during application and drying
- Avoid heavy use until the coating has fully cured
- Clean tools promptly, removing residual product before cleaning with a minimum amount of water
- Dried material can be removed with acetone
- Store in a cool place and protect from temperatures below +5°C or above +30°C
- Dispose of unused product and waste at an approved waste disposal facility. Do not pour down drains or sewers
Product Specifications
- Product Type: Two-component, water-based polyurethane wood floor lacquer
- Pack Size: 4.95L lacquer
- Hardener: 0.41L included
- Finish: Ultra Matt
- Sheen: Approximately 4% at 60°
- Mixing Ratio: 1 part hardener to 1 litre of lacquer
- Pot Life: Maximum 3 hours at 20°C
- Coverage: Approximately 8–10m² per litre per coat
- Recoating Time: 2–3 hours
- Light Use: Approximately 24 hours
- Full Cure: Approximately 7 days
- Certifications: GREENGUARD Gold, EMICODE EC1 and DIN 51 130 Class R9
